Metal Detector METAL SHARK® FL
Conveyor installation below or above conveyed materialTypically, the FL types are used in fleece, textile and foil production and provide highest performance in detecting magnetic and non-magnetic metals.
shark_fl_e.pdfIndustrial design
Sensor and control unit housing are made of sturdy stainless steel, appropriate for use in the food industry. With a maintenance free design and high quality construction, for reliable operation in the most challenging industrial environments.
Easy handling
In practical use, settings of metal detectors often need to be checked quickly and reliably during production. Cassel attached great importance to user-friendliness: The software is self-explanatory: An interface-manager leads the user step by step through the menus that have to be adjusted. E.g. product teach is done with one-button-push.
Intuitive operation
The display shows only the information that is really required. Reduction to the essential makes operation clear and transparent.
Performance validation
According to HACCP the metal detector is a critical control point and therefore, it must be checked regularly. The performance validation automatically prompts the operator to test the performance of the METAL SHARK® at pre-set intervals.
Type METAL SHARK® FL
Conveyor installation below or above conveyed material Applications: Plastic/foil production, panel board production, felt/textile/fleece production
Best Sensitivity* *depending on product effects and proper installation
Sensor and control unit housing are made of sturdy stainless steel, appropriate for use in the food industry. With a maintenance free design and high quality construction, for reliable operation in the most challenging industrial environments.
Easy handling
In practical use, settings of metal detectors often need to be checked quickly and reliably during production. Cassel attached great importance to user-friendliness: The software is self-explanatory: An interface-manager leads the user step by step through the menus that have to be adjusted. E.g. product teach is done with one-button-push.
Intuitive operation
The display shows only the information that is really required. Reduction to the essential makes operation clear and transparent.
Performance validation
According to HACCP the metal detector is a critical control point and therefore, it must be checked regularly. The performance validation automatically prompts the operator to test the performance of the METAL SHARK® at pre-set intervals.
Type METAL SHARK® FL
Conveyor installation below or above conveyed material Applications: Plastic/foil production, panel board production, felt/textile/fleece production
Best Sensitivity* *depending on product effects and proper installation
| Sensing width 200 - 1000 mm | ||||||||
| Height above sensor mm | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 |
| Ferrous ball Ø mm | 0,8 | 1,0 | 1,8 | 2,2 | 2,5 | 3,8 | 5,0 | 6,0 |
| Sensing width 1000 - 4000 mm | ||||||||
| Height above sensor mm | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 |
| Ferrous ball Ø mm | 1,0 | 1,5 | 2,2 | 3,0 | 3,4 | 5,5 | 7,0 | 8,0 |
| Non-Ferrous | 1,2x Ferrous ball Ø |
| Stainless | 1,5x Ferrous ball Ø |
| Installation | typical horizontal, but each angle is applicable |
| Metal free zone before/after detector | Fix metal = 250 mm Moving Metal = 500 mm |
| Power supply | 85-264 V / 50-60 Hz | Power input | 100 Watts |
| Ambient temperature | -10...+50 C/ 15...120 F |
| Product temperature | -20...+80 C |
| Degree of protection | Control unit IP65 (Nema 4x, 12) Sensor IP67 (Nema 6P, 12) |
| Sensor head | Stainless steel housing |
| Control unit | Stainless housing prepared for wall mounting with link cable |
| Link cable | 2,5 m (8,2 feet) with cable protection tube, applies only with wall mounting option for the control unit |
| Conveyor speed | 25 - 3000 mm/sek. (1''-6,6 feet/sec.) |
| Product effect compensation | Automatically, with teach mode |
 | |  | |  |
 | |  | | |
